R Panel with Purlin Bearing Leg - Roofing
R Panel for use on a roof must use the panel with the purlin bearing leg. Typical installations would require a minimum 3:12 pitch. However, installation is allowed on a roof with as low as a 1:12 pitch if used with side lap tape and stitch screws. This panel is available in 26GA G-60 galvanized steel in Bright White, Regal White or Evergreen and also in a clear acrylic coated bare AZ-55 galvalume panel.
R Panel Steel Roofing & Siding
Our R Panel is an exposed fastener roofing or siding panel most commonly used on large agricultural, industrial or commercial buildings. The larger profile rib is asthetically proportional on the larger buildings and also allows for applications with limited roof pitch.
In addition, we offer a full line of standard trims to match and can custom bend trims to your specifications. We also offer many other accessories to compliment and complete your building project.
Click links below for additional information:
R Panel without Purlin Bearing Leg - Siding
R Panel for use as siding typically uses the panel without the purlin bearing leg. This panel is available in 5 Colors in the 26GA G-60 galvanized steel panel or 18 colors in the 29GA G-60 galvanized or AZ-50 galvalume steel panels. See bottom of Ultra 2000 color chart for R Panel colors available.